If you are looking to install the bush kits yourself, you will need to have aluminium welding capabilities as the four aluminium tubes need to be welded into the transom of your boat at the right hole centres for your outboard. (See extra images).
MarineXpress are able to install complete Vibra-Stop kits in our well equipped fabrication shop using our qualified Outboard Technician. When installing the kit is is vital that you follow all instructions that will be supplied with the kit , in particular note that the torque settings for the engine bolts are a minimum of 28ft/lb or 38nm or a maximum of 34ft/lb or 45nm, and after installation should be checked after the first 10 hours of use then all torque settings should be checked after every 100 hours of use. For Mercury Verado Engines 200-275hp the torque setting should be 38ft/lb or 50nm.